Gitlab+Jenkins学习之路(二)之gitlab部署

  • 1、安装依赖及gitlab
  • <code>[root@linux-node1 ~]# yum install -y curl policycoreutils openssh-server openssh-clients postfix 
    [root@linux-node1 ~]# systemctl start postfix/<code>
    • 2、安装gitlab
    <code>由于国内网络偏慢,这里使用清华大学的镜像源进行安装gitlab-ce
    [root@linux-node1 ~]# cat /etc/yum.repos.d/gitlab-ce.repo
    [gitlab-ce]
    name=gitlab-ce
    baseurl=http://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7
    repo_gpgcheck=0
    gpgcheck=0
    enabled=1
    gpgkey=
    [root@linux-node1 ~]# yum makecache
    [root@linux-node1 ~]# yum install -y gitlab-ce/<code>
    • 3、修改配置文件
    <code>[root@linux-node1 ~]# vim /etc/gitlab/gitlab.rb 
    external_url 'http://192.168.56.11'
    [root@linux-node1 ~]# gitlab-ctl reconfigure
    这一步时间比较长,耐心等待
    gitlab常用命令:
    关闭gitlab:[root@linux-node1 ~]# gitlab-ctl stop
    启动gitlab:[root@linux-node1 ~]# gitlab-ctl start
    重启gitlab:[root@linux-node1 ~]# gitlab-ctl restart
    重载配置文件: gitlab-ctl reconfigure/<code>

    可以使用gitlab-ctl管理gitlab,例如查看gitlab状态:

    <code>[root@linux-node1 ~]# gitlab-ctl status
    run: gitaly: (pid 53207) 176s; run: log: (pid 52331) 647s
    run: gitlab-monitor: (pid 53233) 174s; run: log: (pid 52406) 620s
    run: gitlab-workhorse: (pid 53189) 180s; run: log: (pid 52274) 671s
    run: logrotate: (pid 52307) 654s; run: log: (pid 52306) 654s
    run: nginx: (pid 53694) 2s; run: log: (pid 52285) 665s
    run: node-exporter: (pid 52388) 631s; run: log: (pid 52387) 631s
    run: postgres-exporter: (pid 53262) 171s; run: log: (pid 52478) 581s
    run: postgresql: (pid 52013) 855s; run: log: (pid 52012) 855s
    run: prometheus: (pid 53245) 172s; run: log: (pid 52443) 598s
    run: redis: (pid 51951) 867s; run: log: (pid 51950) 867s
    run: redis-exporter: (pid 52426) 609s; run: log: (pid 52425) 609s
    run: sidekiq: (pid 52256) 677s; run: log: (pid 52255) 677s
    run: unicorn: (pid 52218) 683s; run: log: (pid 52217) 683s
    提示:gitlab需要使用到80端口,所以得保证80端口不被占用


    [root@linux-node1 ~]# lsof -i:80
    COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
    httpd 963 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 1156 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 1392 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 1544 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 22057 root 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 22793 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 23247 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 23367 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 26356 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 64149 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    httpd 64641 apache 4u IPv6 56349 0t0 TCP *:http (LISTEN)
    [root@linux-node1 ~]# systemctl stop httpd
    [root@linux-node1 ~]# gitlab-ctl restart
    ok: run: gitaly: (pid 55012) 0s
    ok: run: gitlab-monitor: (pid 55022) 1s
    ok: run: gitlab-workhorse: (pid 55025) 0s
    ok: run: logrotate: (pid 55034) 1s
    ok: run: nginx: (pid 55036) 0s
    ok: run: node-exporter: (pid 55046) 1s
    ok: run: postgres-exporter: (pid 55051) 0s
    ok: run: postgresql: (pid 55059) 1s
    ok: run: prometheus: (pid 55066) 0s
    ok: run: redis: (pid 55072) 0s
    ok: run: redis-exporter: (pid 55081) 0s
    ok: run: sidekiq: (pid 55105) 0s
    ok: run: unicorn: (pid 55112) 0s
    [root@linux-node1 ~]# lsof -i:80
    COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
    nginx 54794 root 8u IPv4 1562548 0t0 TCP *:http (LISTEN)
    nginx 54802 gitlab-www 8u IPv4 1562548 0t0 TCP *:http (LISTEN)/<code>
    • 4、浏览器访问登录:

    安装完成!

    备注:gitlab-ctl reconfigure这一步时软件问题较多,需要文件libstdc++.so.6.0.21,可私信联系我


    分享到:


    相關文章: